| Customization: | Available |
|---|---|
| Type: | Oral Light |
| Material: | Metal |
|
Still deciding? Get samples of US$ 25/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
1. Description
LED Curing Light is composed mainly of high power LED, micro-control electric circuit, Li-on battery, charging base, light guide, Circular eye-protector and power adapter.
Adjustable curing time and three curing modes are available.
2. Principle
LED Curing Light is applied to ray radiation principle to solidify the light-sensitive resin by shooting at it in a short time.
3. Intended use
Used for polymerization of light cured materials by dental professionals.
4. Main Technical Index
4.1 Power Adapter
| Li-ion Battery | |
| Input | AC 100~240V, 50/60Hz |
| Voltage | DC 3.7V - Output: DC 4.2V |
| Capacity | 2200mAh |
| Charging Time | About 5 hours |
| LED | |
| Outer Diameter | Ø8mm |
| Area | 50mm2 |
| Wavelength | 450~470nm |
| Illumination | 1200-1500mw/cm2 |
Three Curing Mode:
P1:FAST Mode - full power all the time
P2: RAMP Mode - gradually increasing power then full power till ends
P3:PULSE Mode - 1 second interval with full power for 1.8 second
4.3 Dimension:
Main Unit (Control Part): 26*40*145mm
Charging Base: 60*100*70mm
4.4 Net weight: about 320 g
4.5 Working Environment
Ambient temperature: 5ºC ~ +40ºC
Relative humidity range: 0% ~ 80%
Atmospheric pressure: 70KPa ~ 106KPa
5. Structure and Components
1. Light guide
2. Circular eye-protector
3. power adapter
4. Charging base
5. Hand piece
6. LCD Panel
7. Setting Buttons
8. Charging Indicator
){kind=link}