Product Description
This type is the new product of my the up-to-date development of company, is that the technician of tooth section is used for embedded material (phosphate etc.) Irritate horizontal material (agar, gypsum etc.) and stir the main device of work, owing to accomplish in vacuum state,So realize no bubble fully, therefore can improve the fillibility of material and the density of model.
The Vacuum mixer is used for mixing and vibrating investment materials and molded materials. As the mixing process is done in a vacuum state, the work piece is free of bubbles, and firmness and compactness of the mold has also been improved.
Parameters
Voltage: AC220V 50HZ/110V 60HZ
Work rate: 150W
Effective volume: 500ml
Vacuum degree: ≥0.08Mpa
Weight: 16Kg
Exterior dimensions: 320*300*580mm
Installation method: vacuum mixer (negative pressure type) is of desktop structure and needs to be used together with air compressor. After unpacking the case and counting, connect the power supply and the air compressor to use according to the steps of using method.
Usage
1, Before use with random with the trachea to connect the vacuum mixer and air compressor.
2, Turn on the power supply, open the air compressor valve.
3, The material in the stirring tank first after pre-stirring to paste, the stirring tank and the mixing sleeve base docking, and light into the tank, holding the mixing cylinder.
4. Press the vacuum switch on the side of the machine and the stirring switch on the front of the machine. At this time, the working state is stirring under vacuum. You can release your hand and move the tray to the right below the stirring tank. The stirring time can be customized.
5, After the mixing, holding a stirring tank, close the vacuum switch, can be removed.
Precautions
1, All kinds of mixer must read the instructions before use, understand its use steps and precautions, prevent unnecessary damage to the instrument.
2, Cooperate with the use of vacuum mixer air compressor air pressure should not be less than 0.6Mpa.
3, If the machine has a fault, please find experienced professional maintenance.
4, Regular inspection machine safety grounding. Good grounding shall be maintained between the protective grounding in the grid power plug switch and the equipment enclosure.
5, Stir the embedding material in the tank don't more than half of the volume, in order to avoid the embedding material suction gas path caused by gas path congestion.
){kind=link}