This machine is for precision dental equipment, laser positioning to ensure species nail holes precisely. The machine uses carbide step drill bits and drilling depth can be adjusted.
performance indicators:
| Voltage |
220V/50Hz±10% 110V/60Hz±10% |
| Power |
100W |
| Speed |
15000rpm |
| Size |
16*16*33cm |
| Weight |
5.5kg |
| Drill diameter |
φ3 * φ1.85, φ3 * φ1.95 |
Product use:
Good grounding plug AC 220V power supply, close the power switch power indicator light, and the red laser dot lights (φ1 ~ φ1.5). Just adjust the desired drilling depth, put a plaster model can be carried out drilling. Special Note: When the plaster model placed bench laser pinpoint holes, be sure to plaster model with both hands gripping the table together, and press down until the drilling is completed, together again on the rise reset. Midway must not let go, otherwise it will be easy to break or drill holes and allowed too large.
how to replace the laser head:
Unplug the power cord, open the bottom cover; loosen the laser head pin screws, pull out the laser head, careful not to pull off the back of the wire (the other hand on the inside line feed); cut the laser head is connected to the back of the wire, the wire red and white, white and red cut line than 20mm, were set into the heat-shrinkable tube with two new red and white line color laser welding head, then heated shrink tubing (hair dryer or an open flame can) make tight package to shrink; front-line delivery, pull back, push the laser head vertically into the hole and tighten the pin screws; power light, if slight deviations from the table plate removed, then four motor fixing Loosen the screws (do not twist off), adjust the center and then tighten the screws, respectively.
How to replace the drill:
Turn off the power, remove the rubber cartridge. With high spindle wrench flat root port, low chuck wrench housing flat mouth, loosen the screw to replace the drill bit, proof depth with two wrenches to tighten.
About us
Foshan Vimel Dental Equipment Co.,Ltd. is a professional enterprise that specializes in research and development, production and marketing of dental equipment.
Our main products includes High & Low speed handpiece, LED Curing Light, Scaler, Dental unit, Doctors' Chair, Oil-free air compressor, Gutta cutter, Endodontic treatment, Apex locator, Intra-oral camera, Micro motors, Dental lamps, Sterilizer and dental accessories etc.
"Superior quality, reasonable price and satisfactory service" is our principle. We are sincerely looking forward to cooperating with companies from the whole world for mutual benefit cooperation business with a brilliant future!
Q&A
★1. Q: Are you a manufacturer, or a trading company?
A: We are a manufacturer.
★2. Q: What's the delivery time?
A: 3 -5 working days by express.
★3. Q: What's your price terms?
A: Our price is EX-Work price. For CIF & FOB price, welcome to contact us directly by email, phone.
★4. Q: What's the payment method?
A: T/T (Bank Transfer), Western Union, Money Gram, Paypal.
Audited Supplier 
){kind=link}
){kind=link}